Back
| METHOD UNITS | TEST | RESULTS | UNIT |
|---|---|---|---|
| ASTM D5002 | Density and Relative Density of Crude Density and Relative Density of Crude Oil and Average API Gravity | 29.7(29.7) Min | API |
| ASTM D1298-99 | Density @ 15 Deg C | 0.87(0.775) | Kg/t |
| ASTM D97 | Pour Point of Petroleum Pour Point Pour Point | <-33(-36) BELOW ZERO <-27.4(-32.8) BELOW ZERO | ®C |
| ASTM D93-IP34 | Pensky-Martens Closed cup Flash Point Corrected Flash Point | 117(137) Min | ®F |
| ASTM D4294 | Sulfur content in petroleum Product by EDXRSulfur content | 0.38(0.358) Max | W1% |
| ASTM D445 | Kinematic/Dynamic viscosity Kinematic viscosity @ 122®F/50®C | 17.83(18.12) Max | Mm2% |
| ASTM D6304 | Water content by coulometric Karl Fisher Titration Water content | 0.20(0.7) Max | W1% |
| ASTM D482 | Ash from petroleum product Average Ash | 0.279(1.007) Max | W1% |
| ASTM D2161 | Conversion of kinematic viscosity To SUS/SFS I Saybolt furol Viscosity | 10.9SFS | Max |
| ASTM D5184 | Aluminum and Silicon in Fuel Oils By KP-AES or AAS Aluminum content | 102(max) | Mg/kg |
| ASTM D95 | Water by Distillation Vol% | 0.70(Max) | Vol% |
| ASTM D4530.06 | Carbon Residue | 1.11(max) | W1% |
| Method Test Result Unit | |||
| IP 143 Asphalteness Heptane Insoluble | |||
| Asphaltene content | 0.08 | W1% | |
| IP 501 Determination of AL, Si, V, Ni, Fe, Na, Ca, Zn, P in Fuel Oil | |||
| Aluminum | 372 | Mg/kg | |
| Silicon | 187 | Mg/kg | |
| Sodium | 117 | Mg/kg | |
| Vanadium | 1 | Mg/kg | |
| Calcium | 779 | Mg/kg | |
| Zinc | 298 | Mg/kg | |
| Phosphorus | 4176 | Mg/kg | |
| Iron | 545 | Mg/kg | |
Note:- The product specifications are subject to change depending on the origin.
